Engraved lamacoid · 7 designs
Engraved danger signs
For the hazards that will kill or seriously injure someone if they get it wrong. Red header, clean white field, cut into phenolic so nothing peels off the door of a vault or a substation gate.
Danger Signs we engrave
Add any design to your cart as it is, or open it in the sign builder to change the wording, size or colours.
Reserve DANGER for the worst hazards
DANGER is the top signal word. It means the hazard will cause death or serious injury if it is not avoided: exposed high voltage, a permit-required confined space, a live bus. Using DANGER for everything dilutes it. Keep it for the hazards that deserve it and use WARNING or CAUTION for the rest.
Built for gates, vaults and outdoor enclosures
Danger signs tend to live outside: on fences, pad-mount transformers, hatches and pump stations. We engrave them on white/red phenolic and drill them for screws or rivets so they stay put. Adhesive alone is not what we recommend for outdoor or hot surfaces.
Need the actual voltage on the sign? Put it on. High voltage signs that state the voltage tell a worker far more than a generic warning.
Read before you order
Guides
Confined space signs in Ontario: wording, placement and mounting that lasts
How to sign a confined space in Ontario: O. Reg. 632/05 context, confined space sign wording, where signs go on tanks, pits and hatches, and mounting.
Read the guide
Danger vs warning vs caution signs: which one does your hazard need?
Danger vs warning vs caution signs explained: what each signal word means under ANSI Z535, how CSA Z321 fits in, and how to pick the right one for a hazard.
Read the guide
High voltage signs: which signal word, what wording, and where they go
A practical guide to high voltage signs in Canada: when to use DANGER, WARNING or CAUTION, how to state the voltage, where signs go and how to mount them.
Read the guide
FAQ
Danger Signs: common questions
When should I use a DANGER sign?
Use DANGER when the hazard will cause death or serious injury if it is not avoided. Typical examples are exposed high voltage, confined spaces and arc flash hazards.
What colours are used on danger signs?
DANGER uses a red header with white lettering. Our engraved version is white phenolic with a red core, so the header band and message are cut in red.
Are engraved danger signs suitable outdoors?
Phenolic handles outdoor use well. For outdoor installs we recommend screw or rivet mounting rather than adhesive only. Tell us where the sign is going and we will spec it for that location.
Related sign families
Custom · Same-day
Need danger signs with your own wording?
Send the wording, size and quantity. We send a proof, engrave it, and most orders are ready the same day.